Instrumental Multi-Element Chemical Analysis [E-Book] / edited by Z. B. Alfassi
The analysis of materials containing several elements used to be a difficult problem for analytical chemists, so a well established sequence of wet chemical qualitative tests were performed to ensure each element was detected. Quantitative tests could then be carried out on the sample, according to...
Saved in:
Full text |
|
Personal Name(s): | Alfassi, Zeev B., editor |
Imprint: |
Dordrecht :
Springer Netherlands,
1998
|
Physical Description: |
XIII, 506 p. online resource. |
Note: |
englisch |
ISBN: |
9789401149525 |
DOI: |
10.1007/978-94-011-4952-5 |
Subject (LOC): |
- 1 Preparation of samples
- 1.1 Introduction
- 1.2 Dissolution of geological and environmental inorganic samples
- 1.3 Dissolution of biological (organic) material
- 1.4 Contamination from reagents and equipment
- References
- 2 Separation and preconcentration of trace inorganic elements
- 2.1 Introduction
- 2.2 Precipitation
- 2.3 Separation and preconcentration of trace elements by columns (ion exchange and sorption)
- 2.4 Preconcentration of trace elements by solvent extraction
- 2.5 Preconcentration by formation of volatile compounds
- 2.6 Electrochemical preconcentration
- References
- 3 Quality assurance, control and assessment
- 3.1 Introduction
- 3.2 Quality assessment
- 3.3 Statistical methods
- 3.4 Significance tests
- 3.5 Errors in instrumental analysis—calibration lines
- References
- 4 Activation analysis
- 4.1 Introduction
- 4.2 Nuclear structure
- 4.3 Nuclear reactions
- 4.4 Decay rates
- 4.5 Irradiation sources
- 4.6 Detection and measurement of radiation
- 4.7 Activation analysis techniques
- 4.8 Special activation analysis methods
- 4.9 Exercises and solutions
- References
- 5 Inductively coupled plasma optical emission and mass speetrometry
- 5.1 Inductively coupled plasma as an analytical source
- 5.2 Inductively coupled plasma optical emission spectrometry
- 5.3 Inductively coupled plasma mass spectrometry
- 5.4 Sample introduction
- References
- 6 Electroanalytical methods
- 6.1 Introduction
- 6.2 Fundamentals
- 6.3 Potentiometry
- 6.4 Conductometry
- 6.5 Electrogravimetry and coulometry
- 6.6 Voltammetry and amperometry
- References
- 7 Atomic absorption spectrometry
- 7.1 Introduction
- 7.2 Theory
- 7.3 Major components and instrument types
- 7.4 Atomization
- 7.5 Hydride generation
- 7.6 Interferences
- 7.7 Instrumental background corrections
- 7.8 Modifiers, standards and chemicals
- 7.9 Sample preparation and automation
- References
- 8 X-ray fluorescence analysis
- 8.1 Introduction
- 8.2 Wavelength- and energy-dispersive XRF
- 8.3 X-ray tubes and radioisotope sources
- 8.4 Methods of quantitative analysis
- 8.5 Scattered radiation
- 8.6 Electron probe micro-analysis
- 8.7 Other XRF techniques
- 8.8 Examples
- 8.9 Appendix
- References
- 9 Analysis of ions using high-performance liquid chromatography
- 9.1 What is ion chromatography?
- 9.2 Fundamentals of the Chromatographic process
- 9.3 Principles of the separation
- 9.4 Types of stationary phases
- 9.5 Properties of mobile phases
- 9.6 Ion suppression in ion chromatography
- 9.7 Detection in ion chromatography
- 9.8 Applications—summary
- References
- 10 Scattering methods
- 10.1 Introduction
- 10.2 Theoretical considerations
- 10.3 The experimental arrangement
- 10.4 Spectrum analysis
- 10.5 Numerical methods
- 10.6 Applications to elemental analysis
- References
- 11 Elemental analysis of surfaces
- 11.1 Introduction: overview of surface phenomena and major techniques
- 11.2 Auger electron spectroscopy and X-ray photoelectron spectroscopy
- 11.3 Secondary-ion mass spectrometry
- 11.4 Comparative evaluation of the performance of the three techniques
- 11.5 Summary
- References.