Mechanical Effects of Welding [E-Book] : IUTAM Symposium, Luleå/Sweden, June 10–14, 1991 / edited by Lennart Karlsson, Lars-Erik Lindgren, Mikael Jonsson.
Jonsson, Mikael, (editor)
Karlsson, Lennart, (editor) / Lindgren, Lars-Erik, (editor)
Berlin, Heidelberg : Springer, 1992
XVI, 287 p. online resource.
englisch
9783642847318
10.1007/978-3-642-84731-8
International Union of Theoretical and Applied Mechanics
Full Text
Table of Contents:
  • Constitutive Modelling of Metals at High Temperatures
  • Coupling Heat Transfer, Microstructure Evolution and Thermal Stress Analysis in Weld Mechanics
  • Very High Homologous Temperature Constitutive Models for Semi-Solid and Solid Metals
  • Transformation Plasticity (TRIP) under a Triaxial Stress State
  • Research on Welding Stresses during Phase Transformation
  • Modelling Phase Transformations for the Calculation of Internal Stresses During Fast Heating and Cooling in Steels
  • The Analytical Method of Bainite Transformation Evaluation in Microalloyed Steels in the Process of Rapid Cooling
  • Calculations of Temperatures, Strains and Stresses
  • Thermal Problems of Welding
  • Three-Dimensional Simulation of a Laser Surface Treatment through Steady State Computation in the Heat Source’s Comoving Frame
  • Temperature Fields and Stress States in Welded Tubes of Rectangular Cross Section
  • Residual Stresses and Residual Deformations
  • The Characteristics of the Source of Welding Residual Stress (Inherent Strain) and its Application to Measurement and Prediction
  • Residual Stress Distributions after Welding as a Consequence of the Combined Effect of Physical, Metallurgical and Mechanical Sources
  • Measurements of Residual Strains and Stresses
  • Measurement of Residual Stress Distributions Near the Toe of a Weld between a Bracket and a Plate Using the Crack Compliance Method
  • The Neutron Strain Scanner: Measurements in Welds
  • Effects of Defects and Residual Stresses on Fracture and Fatigue
  • Effect of Weld Metal Mis-match on Toughness Requirements: Some Simple Analytical Considerations using the Engineering Treatment Model (ETM)
  • Compressive Strength of Structural Members with Undermatching Weld Joints
  • Effect of Mechanical Heterogeneity on the Absorbed Energy of Welded Joint
  • On the Correlation between Charpy Notch Toughness and Fracture Toughness of Base and Weld Metal
  • Poster Session
  • Three Dimensional Finite Element Modeling of Welded Structures
  • Influence of Weldmatching on Mechanical Behaviours
  • Combined Solid and Shell Element Modelling of Welding
  • Mathematical Modelling of Molten Pool in Arc Welding
  • Computation of Temperature Distribution due to Welding in Piping Systems
  • Effects of Residual Stresses on Creep Deformation
  • Design of Weldments in Structures Subjected to Creep
  • Creep Behaviour of 304 Stainless Steel Welded Joints Composed of Two Different 308 Weld Metals
  • Effects of Residual Deformations and Residual Stresses on Buckling
  • The Influence of Welding Stresses and Distortions on the Stability of Shells of Revolution
  • Influences of Welding Imperfections on Stiffness of Rectangular Plate under Thrust
  • Influence of Residual Stresses and Deformation on Buckling Behaviour of Plates
  • Harmonic Response of a Spot Welded Box Beam - Influence of Welding Residual Stresses and Deformations.