This title appears in the Scientific Report : 2015 
phenoPET: A dedicated PET Scanner for Plant Research based on digital SiPMs
Streun, Matthias (Corresponding Author)
Degenhardt, Carsten / Dorscheid, Ralf / Erven, Andreas / Reinartz, Sebastian / Jokhovets, Lioubov / Meessen, Louis / Mülhens, Oliver / Nöldgen, Holger / Ramm, M. / Scheins, Jürgen / Schramm, Nils / Zwaans, Ben / Kemmerling, Günter / Hämisch, York / Jahnke, Siegfried / van Waasen, Stefan
Zentralinstitut für Elektronik; ZEA-2
2014
2014
IEEE Medical Imaging Conference, Seattle (USA), 2014-11-09 - 2014-11-15
Poster
Sustainable Bioproduction
OpenAccess
Please use the identifier: http://hdl.handle.net/2128/8778 in citations.


In the frame of the German Plant Phenotyping Project (DPPN) we developed a novel PET scanner. In contrary to a clinical or preclinical PET scanner the detector rings of the Plant System are oriented in a horizontal plane. The final system will be equipped with three rings covering a Field of View (FOV) of 18 cm diameter and 20 cm axial height. One detector ring is formed by 12 modules. Each module contains four 8×8 pixel digital SiPM devices DPC-3200-22-44 (Philips Digital Photon Counting) connected to a PCB and four scintillator matrices with 16×16 individual LYSO scintillators. Crystal size is 1.85×1.85×10 mm3. The matrices are composed with both reflective and transparent contact faces between the crystals in order to optimize crystal identification. A cooling system keeps the detectors below 5°C and limits the dark count rate. Data are already preprocessed by the Cyclone FPGA (Altera) in the module and transmitted from there at 50MiB/s to the base board. The base board collects the data from all modules and allows coincidence detection performed on a Kintex-7 FPGA (Xilinx). Finally the data link to the computer system for image reconstruction is realized via an USB 3.0 connection. Due to the fast photodetectors the system is dedicated to work with rather high activities. Preliminary measurements showed a coincidence peak of 250 ps FWHM between two detector elements and an energy resolution ΔE/E = 12%. This paper will present first results from a one ring system with a FOV of 18 cm diameter and 6.5 cm axial height.