TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings [E-Book] / edited by The Minerals, Metals, & Materials Society.
Cham : Springer, 2017
XIII, 818 p. 488 illus. online resource.
englisch
9783319514932
10.1007/978-3-319-51493-2
The Minerals, Metals & Materials Series
Full Text
Table of Contents:
  • Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron
  • Morphology of Order-disorder Structures in Rapidly Solidified L12intermetallics
  • Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings
  • Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials
  • Transmission Probability of Diffusing Particles A Case Study
  • Preparation of Porous Titanium Oxide Film by Sol-Gel Method
  • Part 20: Solid State Precipitation
  • Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features
  • Analysis of Beta Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods
  • Carbide Precipitation in a Low-alloy Ferritic Steel
  • Part 21: Student-Run Symposium: Building Bridges Connecting Academic and Industry Research
  • Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.
  • Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology
  • High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons
  • Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles
  • Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy
  • Synthesis of AgNPs from Industrial Wastes
  • Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route
  • Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships
  • Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies
  • Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications
  • Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications
  • Additive Manufacturing to Produce Standard and Custom Alloy Titanium
  • Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing
  • Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification
  • The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts
  • SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions
  • Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing
  • Scaling Relationships for Direct Ink Writing with Acoustic Focusing
  • The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size
  • Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings
  • Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation
  • Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms
  • Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation
  • Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions
  • Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths
  • Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates
  • Part 5: Advanced High-Strength Steels
  • Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels
  • Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles
  • Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels
  • Part 6: Advanced Materials in Dental and Orthopedic Applications
  • Characterization of Chitin Synthesized from Snail Shell
  • Titanium-magnesium Composite for Dental Implants (BIACOM)
  • Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V
  • Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites
  • Part 8: Applications of Solidification Fundamentals
  • Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions
  • Part 9: Biological Materials Science
  • Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants
  • Osteoporosis and fatigue fracture prevention by analysis of bone microdamage
  • Bone Remodeling under Tooth Loading
  • Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium
  • Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds
  • Part 10: Bulk Metallic Glasses XIV
  • Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass
  • Part 11: Computational Thermodynamics and Kinetics
  • Comparison of the Phase-field Models to Predict the Recrystallization Kinetics
  • Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments
  • Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations
  • Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization
  • Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel
  • Formation and Control of CaS Inclusion in Gear Steel 20MnCr5
  • Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models
  • Thermodynamic Modeling of Al-Fe-Cr Ternary System
  • Part 12: Defects and Properties of Cast Metals
  • A Modeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy
  • Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold
  • Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron
  • Effect of Various Aluminum Content on the Formation of Inclusion
  • Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation
  • Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting
  • Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting
  • The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality
  • Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process
  • Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot
  • Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring
  • Part 13: Environmentally Assisted Cracking: Theory and Practice
  • Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron
  • Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region
  • Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys
  • Part 14: General Poster Session
  • Synthesis and characterization of AlB4C powders by mechanical alloying
  • Direct Conversion of Celestite to SrCO3 by Wet Milling
  • Part 15: High Temperature Electrochemistry III
  • Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications
  • Impurity Removal from Titanium Oxycarbide
  • Next-Generation Molten Oxide Energy Materials R&D
  • Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt
  • The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System
  • Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI
  • Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel
  • Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications
  • Development of Mold Inductor for Power Conversion System
  • Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling
  • Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters
  • Part 18: Phase Transformations and Microstructural Evolution
  • An Experimental Assessment of the a +a Miscibility Gap in Fe-Cr
  • Phase Transformation,