This title appears in the Scientific Report :
2015
Please use the identifier:
http://dx.doi.org/10.1002/pip.2629 in citations.
Preparation and measurement of highly efficient a-Si:H single junction solar cells and the advantages of μ c-SiO $_{x}$ :H n -layers
Preparation and measurement of highly efficient a-Si:H single junction solar cells and the advantages of μ c-SiO $_{x}$ :H n -layers
Reducing the optical losses and increasing the reflection while maintaining the function of doped layers at the back contact in solar cells are important issues for many photovoltaic applications. One approach is to use doped microcrystalline silicon oxide (μc-SiOx:H) with lower optical absorption i...
Saved in:
Personal Name(s): | Lambertz, Andreas (Corresponding Author) |
---|---|
Finger, Friedhelm / Schropp, Ruud E. I. / Rau, Uwe / Smirnov, Vladimir | |
Contributing Institute: |
Photovoltaik; IEK-5 |
Published in: | Progress in photovoltaics, 23 (2015) 8, S. 939–948 |
Imprint: |
Chichester
Wiley
2015
|
DOI: |
10.1002/pip.2629 |
Document Type: |
Journal Article |
Research Program: |
Accelerated development and prototyping of nano-technology-based high-efficiency thin-film silicon solar modules Solar cells of the next generation |
Subject (ZB): | |
Publikationsportal JuSER |
Reducing the optical losses and increasing the reflection while maintaining the function of doped layers at the back contact in solar cells are important issues for many photovoltaic applications. One approach is to use doped microcrystalline silicon oxide (μc-SiOx:H) with lower optical absorption in the spectral range of interest (300 nm to 1100 nm). To investigate the advantages, we applied the μc-SiOx:H n-layers to a-Si:H single junction solar cells. We report on the comparison between amorphous silicon (a-Si:H) single junction solar cells with either μc-SiOx:H n-layers or non-alloyed silicon n-layers. The origin of the improved performance of a-Si:H single junction solar cells with the μc-SiOx:H n-layer is identified by distinguishing the contributions because of the increased transparency and the reduced refractive index of the μc-SiOx:H material. The solar cell parameters of a-Si:H solar cells with both types of n-layers were compared in the initial state and after 1000 h of light soaking in a series of solar cells with various absorber layer thicknesses. The measurement procedure for the determination of the solar cell performance is described in detail, and the measurement accuracy is evaluated and discussed. For an a-Si:H single junction solar cell with a μc-SiOx:H n-layer, a stabilized efficiency of 10.3% after 1000 h light soaking is demonstrated. |