This title appears in the Scientific Report :
2016
Please use the identifier:
http://dx.doi.org/10.1002/9783527808465.EMC2016.6252 in citations.
Quantitative measurement of the charge distribution along a tungsten nanotip using transmission electron holography
Quantitative measurement of the charge distribution along a tungsten nanotip using transmission electron holography
Off-axis electron holography can be used to measure the electron-optical phase shift associated with a charge density distribution in the transmission electron microscope (TEM). The charge density can then be recovered either by integrating the Laplacian of the reconstructed phase1 or, equivalently,...
Saved in:
Personal Name(s): | Zheng, Fengshan (Corresponding author) |
---|---|
Migunov, Vadim / Ramsperger, Urs / Pescia, Danilo / Dunin-Borkowski, Rafal | |
Contributing Institute: |
Physik Nanoskaliger Systeme; ER-C-1 Mikrostrukturforschung; PGI-5 |
Imprint: |
Weinheim, Germany
Wiley-VCH Verlag GmbH & Co. KGaA
2016
|
Physical Description: |
737 - 738 |
DOI: |
10.1002/9783527808465.EMC2016.6252 |
Conference: | 16th European Microscopy Congress (EMC 2016), Lyon (France), 2016-08-28 - 2016-09-02 |
Document Type: |
Contribution to a conference proceedings |
Research Program: |
Controlling Configuration-Based Phenomena |
Publikationsportal JuSER |
Off-axis electron holography can be used to measure the electron-optical phase shift associated with a charge density distribution in the transmission electron microscope (TEM). The charge density can then be recovered either by integrating the Laplacian of the reconstructed phase1 or, equivalently, by applying a loop integral2. Whichever approach is used, the perturbed reference wave3 does not affect the measurement of the projected charge density inside the specimen so long as it does not itself contain any charges. Here, we study a W nanotip, in which the charge density distribution is of interest for applications in field emission and atom probe tomography. We assess artefacts and noise in the measurements.Figure 1(a) shows an off-axis electron hologram of a W nanotip recorded at 300 kV using an FEI Titan 60-300 TEM. The interference fringe spacing is 0.318 nm, the nominal magnification is 140 000 and the voltage applied to the electrostatic biprism is 90 V. The apex of the nanotip has a diameter of approximately 5 nm and is covered with a layer of tungsten oxide. A voltage of 50 V was applied between the nanotip and a flat electrode positioned approximately 3 µm away from it. In order to remove the contribution to the phase shift from the mean inner potential, two holograms with and without a voltage applied to the nanotip were recorded. The difference between the two phase images was then evaluated after sub-pixel alignment. Figures 1(b) and (c) show the resulting unwrapped phase before and after adding phase contours of spacing 2π/3 radians. Figure 1(d) shows the charge distribution calculated by applying a Laplacian operator to a median-filtered version of the phase image. Figure 1(e) shows cumulative charge profiles along the nanotip determined both using a loop integral and by applying a Laplacian operator to either an unwrapped phase image or the original complex image wave. The integration region is marked by a green dashed rectangle in Fig. 1 (b). The measured charge profile is consistent between the three approaches. Figure 1(f) shows an evaluation of noise in the measurement obtained by performing a similar integration in a region of vacuum indicated by the red dashed rectangle in Fig. 1(b). Results such as those shown in Figs. 1(d) and (e) can be used to infer the electric field and electrostatic potential around the tip. Future work will involve comparing the present approaches with using a model-based technique for determining the charge density from a recorded phase image. |